Welcome to the Invelos forums. Please read the forum rules before posting.

Read access to our public forums is open to everyone. To post messages, a free registration is required.

If you have an Invelos account, sign in to post.

    Invelos Forums->General: General Home Theater Discussion Page: 1... 3 4 5  Previous   Next
My a/v Receiver Saga - Onkyo TX-NR3008
Author Message
DVD Profiler Desktop and Mobile Registrantspecise_8472
It wasn't me...
Registered: January 27, 2009
New Zealand Posts: 181
Posted:
PM this userDirect link to this postReply with quote
Quoting mediadogg:
Quote:
Here is idea I am thinking about:

Get this:

And use it as a front end (using HDMI out for audio) to my existing Onkyo audio section.


Looks good, but saw that it only supports 7.1.4 for Atmos and DTSx. Not 7.2.4. Not a biggie, but intersting.
Also I found out from the Yamaha reps that there are two models of each offering, one an audiofile version, but actually inside they are identical. Just a more fancy case for $$$ extra.
 Last edited: by specise_8472
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
Man do I love you guys!!!! Thanks for all that info!
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
SR 7011 could be "the one."  Actually less costly than the pre-amp version, and I could sell off the Onkyo to help pay for it. For the extra outboard channels, I have a vintage stereo receiver with decent audio circuits, and a power strip that will power it on only when the main receiver is switched on, or I can use the 12V trigger and an AC relay. I have all that stuff in my toolbox. (I will abandon this idea, if I get a "thump" with power on).

The way I read the manual, you can always choose to get 2 sub woofer outputs that can be separately level adjusted. Probably just an active splitter - not two actual channels. this is OK for me. Because my fronts are "big," (as they go through the crossover of a sub woofer first), I get localized bass up front, plus the LFE mixed in (? not sure). My two rear sub woofers are connected to the sub woofer outputs for LFE (when the Center is a "small" speaker, I should get LFE from the sub woofer outputs, according to the manual).
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
 Last edited: by mediadogg
DVD Profiler Unlimited RegistrantStar ContributorParsec
Registered: June 15, 2012
Australia Posts: 428
Posted:
PM this userDirect link to this postReply with quote
Pretty sure the 7011 has Audyssey XT32 and 2 subwoofer outputs. Audyssey XT32 does equalize both subwoofer outputs - it's not like a splitter. When you run the setup it will do each subwoofer separately and tell you what to do with the volume etc. Once it has mixed both then in the rest of the Audyssey run it treats them as one unit.

I still use my SR7009 which does 7.2.4 - 7011 obviously newer and more features for 4K stuff.

This thread will most probably tell you more then you actually want to know :-)
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
Quoting Parsec:
Quote:
Pretty sure the 7011 has Audyssey XT32 and 2 subwoofer outputs. Audyssey XT32 does equalize both subwoofer outputs - it's not like a splitter. When you run the setup it will do each subwoofer separately and tell you what to do with the volume etc. Once it has mixed both then in the rest of the Audyssey run it treats them as one unit.

I still use my SR7009 which does 7.2.4 - 7011 obviously newer and more features for 4K stuff.

This thread will most probably tell you more then you actually want to know :-)

Thanks. I haven't visited for awhile.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
Almost there!!!!

Finally sold my projector. Previously sold my Oppo ( ). With a few other scraped up savings, I am nearly ready to replace my big a/v receiver. I had a little Onkyo TX-NR509 upstairs, and it died. Fortunately Onkyo had a special program to repair / replace it, due to the infamous HDMI board problem, so I wound up getting $150 rebate on a little replacement TX-NR676, a quite capable low end 4K box. This solved my interim issues with connectivity. Works a treat. No more protocol issues, albeit with fewer speakers, less power and a lot less flexibility in audio / video options. But still, for a net $150 spend, I am quite happy with it.

Now I'm ready to get  a "big boy" and send its little brother back upstairs.

I'm looking at Denon and Marantz at the moment, due to the 3 HDMI outputs (1 for zone 2). If I get an older model, I can get 9.2 for about $1000 or 11.2 for $1500 or less.

My heart is with Onkyo, but the Denon units seems to have more features for the money. But they also appear to be lighter in weight. Smaller power supplies? Less robust? I don't know. My TX-NR3008, only 9.2 same power per channel weighs nearly twice this newer 11.2 channel Denon (63 vs. 32 pounds).

Here is my leading pick at the moment. It's an older model, so I might have to move fast to get one.

Any thoughts? I have really appreciated the thoughtful comments and suggestions from you guys in the past.

(P.S. my venerable Onkyo TX-NR3008 is sitting idle. Just FYI.)
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
 Last edited: by mediadogg
DVD Profiler Unlimited RegistrantStar ContributorParsec
Registered: June 15, 2012
Australia Posts: 428
Posted:
PM this userDirect link to this postReply with quote
If you really want the 11 channels of amplification then I guess that 6300 is the best pick. The later model (6400) doesn't really have a lot of extra features so you aren't missing much there. It's also made in Japan, some people are fussed about that - I guess they don't like chinese build quality much 

As to the weight differences, no idea. I don't think Denon/Marantz have heavy chassis' (except one of the newest models apparently does) so it could be that or maybe it's the transformer in the thing.

If you want to go down to a 9 channel amplification model there are more to choose from, also all of them still do 11.2 processing which means you can add a cheap 2 channel amplifier to power the extra 2 speakers making 11 channels total. I think you can get those sorts of amps for under $100 over in the USA where you are so it could even be more economical. All pre-2018 model Denon/Marantz models have 11 channels processing (I am talking the better models here like you are looking at, not the cheaper ones). This year they are bringing out models that do 13 channel processing (even a model with 13 on-board amplifiers).
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
Quoting Parsec:
Quote:
If you really want the 11 channels of amplification then I guess that 6300 is the best pick. The later model (6400) doesn't really have a lot of extra features so you aren't missing much there. It's also made in Japan, some people are fussed about that - I guess they don't like chinese build quality much 

As to the weight differences, no idea. I don't think Denon/Marantz have heavy chassis' (except one of the newest models apparently does) so it could be that or maybe it's the transformer in the thing.

If you want to go down to a 9 channel amplification model there are more to choose from, also all of them still do 11.2 processing which means you can add a cheap 2 channel amplifier to power the extra 2 speakers making 11 channels total. I think you can get those sorts of amps for under $100 over in the USA where you are so it could even be more economical. All pre-2018 model Denon/Marantz models have 11 channels processing (I am talking the better models here like you are looking at, not the cheaper ones). This year they are bringing out models that do 13 channel processing (even a model with 13 on-board amplifiers).
Thanks. Yes I was thinking about getting the 9.2 and a separate 2 channel amp. The amp that I would get is about $200. Difference in price between the 9.2 and 11.2 is (today) about $400. Not that big a difference to get it all integrated, and be enabled for 13.2 if I want to, so I'm still leaning towards the 11.2 if they don't sell out first.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
 Last edited: by mediadogg
DVD Profiler Desktop and Mobile Registrantspecise_8472
It wasn't me...
Registered: January 27, 2009
New Zealand Posts: 181
Posted:
PM this userDirect link to this postReply with quote
Just a FYI, I got caught in the HDMI cable fiassco.
I have identical cables from the Oppo to the TV/Yamaha.
4k directly to tv and audio to Yamaha. As I was getting Dolby Vision etc OK I assumed that audio was OK.
Turns out I was not getting full Atmos.
I had to upgrade to new 27Gbs HDMI 2.1 cables (rated for 8k), and now everything OK. Also fixed an annoying issue in occassional dropouts in video while TV 'Renegotiated' HDCP with Oppo.

I tested Atmos setup via an Atmos setup program that I have. Via USB on the Oppo, and all channels present and correct now.
 Last edited: by specise_8472
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
Very interesting. I would have expected that a cable could cause the handshaking problem, but losing Atmos, surprises me. Can't imagine why that would happen. Anyway, glad you got it resolved.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
I made the tough decision to go with the Onkyo TX-RX920. I really liked some of the features found on the Denon's, such an extra HDMI for zone2, HD radio and some other nice things.

But I couldn't get over Denon's skimping on the power supply. The Onkyo units are generally several pounds heavier, and the RZ920 is also THX certified which I think requires heftier bass performance. I might be wrong - just putting bits together from all that I am reading. The RZ-920 has 11.2 pre-outs, so that later I can add an outboard amplifier for a set of rear Atmos speakers. And I found a price within my budget.

Part of my bias has been formed from having owned McIntosh equipment back when I was more financially able, and had more cabinet space and was younger, to be able to lift those 60+ pound monsters. I remember pulling the power plug on my MC2100 while it was driving Ohm F speakers to massive deep bass levels, and they would continue to play for several seconds - so much energy was stored in the capacitors. Sigh ... those were the days.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
 Last edited: by mediadogg
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
I finally added two rear-high Atmos speakers. I decided to do it after discovering this recently released little Monoprice amp. Well priced, sturdy, compact and with all the features needed for an external amp (such as auto-on and triggered-on).

I find the TX-RZ920 very easy to use, great sound, and easy to re-calibrate, but I do miss some of the flexibility of the old Onkyo 3008, which allowed you to override just about everything on the fly, after calibration. On the other hand, the RZ920 almost always sounds dead-on, with very easy tweaking available to adjust for differences in the way source materials were recorded.

Soon I will post some pictures of my setup. Thanks again for all the help and advice.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
DVD Profiler Unlimited RegistrantStar ContributorParsec
Registered: June 15, 2012
Australia Posts: 428
Posted:
PM this userDirect link to this postReply with quote
Good to hear you are happy with it, that's the main thing. Bet you are enjoying Atmos sound to 
    Invelos Forums->General: General Home Theater Discussion Page: 1... 3 4 5  Previous   Next