Welcome to the Invelos forums. Please read the forum rules before posting.

Read access to our public forums is open to everyone. To post messages, a free registration is required.

If you have an Invelos account, sign in to post.

    Invelos Forums->General: General Home Theater Discussion Page: 1  Previous   Next
Front Height Speakers
Author Message
DVD Profiler Unlimited RegistrantStar ContributorParsec
Registered: June 15, 2012
Australia Posts: 428
Posted:
PM this userDirect link to this postReply with quote
Ok, give me your thoughts, or if you use front height speakers (or even front wide I guess). How you use them in your setup, what sort of matrix system you use to drive them (as they aren't discrete channels), when you use them (music, movies whatever) etc.

Sort of looking for an idea of how people use front height speakers if they have them. I now have front height speakers and am trying to figure out how to make them sound the best they can. I suddenly have a ton of matrix options etc....
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,396
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
The two of us already talked about it a little bit here.

Since then I have found that I don't use it a lot, mostly because there are only a few built-in profiles in my receiver that include it. But when I do think about it, it is when there are strong vocals near the top of the picture (e.g. music stage show), and my below-screen center channel sounds off center. Then using the front-high option helps move the sound focal point closer to what the screen is showing.

But this is rare. I usually don't notice so much.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
 Last edited: by mediadogg
DVD Profiler Unlimited RegistrantStar ContributorParsec
Registered: June 15, 2012
Australia Posts: 428
Posted:
PM this userDirect link to this postReply with quote
Yup, I remember our little discussion, but now I actually got them because I decided to dump the rear surround speakers. Since our discussion I now have a full set of Orb Audio Mod2's and 2 subwoofers.

You see what I originally did was buy enough Orb's for a 7.1 system Mod2's for front L/R, Centre and Mod1's for Surround L/R and Back L/R. And then I went and bought wall mounts and stuck all my speakers around the room up where the ceiling meets the walls. Except for the back surrounds which stayed on their stands because behind me is where all the control gear sits on a fairly nice piece of furniture. So behind is the gear, then seats and in front is just projector screen and of course all the speakers mounted around the room up high.

Now for vocals and movies, the centre Mod2's are fantastic, makes it sound like they are talking out of the picture, but.. with the rest.. well it doesn't sound that full because of the speakers being so high. It sounded great if you stand up.. but standing up to watch movies isn't all that fun.

Since my receiver will only do 7.2, I decided to basically update the back and side surrounds to Mod2's, and dump the back ones moving them to front L/R approx ear height just to the L and R side of the screen. This means my existing Front L/R which are up where the ceiling meets the walls (top L/R corners) became candidates for front height speakers, and so they now are. The side surround speakers are now Mod2's so they produce a bit bigger sound.

The first thing that got me after I re-did the Audessy setup for the new speaker configuration was all the new matrix modes. Depending on the source some of these have like 7 or 8 options. Various A-DSX (Audessy DSX) married with various versions of Dolby or DTS plus also things like Dolby PLIIz and even that and A-DSX.

I read that Dolby PLIIz was better at heights and A-DSX was better as wides....

Either way, the sound coming from the around the screen is.. well.. the least way you could describe it is FULL. It's everywhere, It's like just a wall of sound coming from the screen and you do get more forward facing effects when things move across the screen, top to bottom, diagonal, whatever. i guess one does miss the old 7.1 stuff where things come from behind over the top of you to the screen because there are no back speakers anymore, but the front on sound is just there! That's the best way to describe it.

I haven't had the configuration long so I got a lot of things to mess with yet. DTS Master Audio + A-DSX sounds... different. It does seem a little like the surround speakers are down a little, which to me seems a little strange because 7.1 inherently uses both the surronds and backs to make it sound like the sound is somewhere behind you (not just directly behind you with backs).

But it is definitely a lot fuller and I don't have to stand up to watch movies anymore :-)

I am just interested to hear what other people do with these sorts of things.
DVD Profiler Unlimited RegistrantStar ContributorParsec
Registered: June 15, 2012
Australia Posts: 428
Posted:
PM this userDirect link to this postReply with quote
I'm guessing very few people use front height speakers here......
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,396
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
Quoting Parsec:
Quote:
I'm guessing very few people use front height speakers here......

I think its the Holidays. People are busy. Other people unfortunately are having troubles. Also I have noticed that there are fewer general interest conversations these days.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
    Invelos Forums->General: General Home Theater Discussion Page: 1  Previous   Next