Welcome to the Invelos forums. Please read the forum rules before posting.

Read access to our public forums is open to everyone. To post messages, a free registration is required.

If you have an Invelos account, sign in to post.

    Invelos Forums->DVD Profiler: Plugins Page: 1 2  Previous   Next
Tool: IdCheck
Author Message
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
While perusing my collection I discovered two anomalies regarding Disc Ids:


A few profiles had 8 character Disc Id keys. Not sure where they came from, but they are not useful in today's Profiler.


In some cases the key Id didn't match the Disc Id in the Discs section.

So, I wrote a little tool to find these anomalies:


Initially I had the idea that I should incorporate this into ProfilerQuery, but I realized that it would be foolish to complicate ProfilerQuery with a function that you would probably only use once (or at least very few times). So I made it a separate program.

IMPORTANT NOTE: "Mismatching IDs" does not necessarily mean that you should try to change the key ID. There can be several reasons why the Ids don't match. This thread talks about one of them. Rather you could use this info to investigate why there are differences, and what - if anything - you should do about it.

IdCheck 1.0.0
My freeware tools for DVD Profiler users.
Gunnar
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
Oh dear! I think I may have to install a spell checker in my Visual Studio. Sometimes I just get blind to my own spelling mistakes.
But DJ Doena was kind enough to be my spell checker today. 

So no more "Mismathcing IDs" in version 1.0.1

I'm always grateful when people point out my mistakes, big or small!

And btw, I almost misspelled "spell checker" above. Wouldn't that be ironic? 

Edit: I have installed a spell checker. So from now on, if there are any more "misspellments" in my programs, I can always blame the spell checker! 
My freeware tools for DVD Profiler users.
Gunnar
 Last edited: by GSyren
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
IdCheck 1.10

I've polished this program a little bit. I added a column with the disc id in the Discs section. I also added optional support for HTTPJolie, so when you double click a row, the selection of that profile in DVD Profiler is a bit smoother and less liable to fail.



The warning at the bottom of my initial post still applies!
My freeware tools for DVD Profiler users.
Gunnar
DVD Profiler Unlimited RegistrantStar ContributorObiKen
Registered: October 22, 2015
Reputation: Highest Rating
Australia Posts: 274
Posted:
PM this userDirect link to this postReply with quote
I found your tool to be both useful and interesting. Not only was it easy to find contribution mistakes, it also exposed what I think is a flaw with DVDprofiler that allowed mistakes to be made.

After studying the contribution notes of the various mismatches found in my library, I found most were Blu-rays and the one common denominator was the "Change UPC/Locality" function.

Too often contributors would take short-cuts when configuring new DiscID profiles by cloning a foreign DiscID profile and using "Change UPC/Locality" to modify the profile name and locality and submit it for approval.

The problem with that process was the contents of the profile had not changed and the original foreign DiscID had remained in the new profile.

So DVDprofiler had no validation check on the newly created DiscID profile and the screeners did not carry out checks on the validity of the disc information within the profile to ensure it matched the profile name. Rather, it was up to the contributor to check the disc information was consistent with the newly created DiscID profile name.

Hence, the mistakes.
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
Interesting observation, ObiKen! 

One way this can happen with DVDs is if you added it as a Disc ID Profile under Win 7 (or with AnyDVD active), and later updated the Dicsc section under Win 10 (w/o AnyDVD), then you would have the old style disc id as profile id and a new style disc id in the Discs section. No validation or warning.
My freeware tools for DVD Profiler users.
Gunnar
DVD Profiler Unlimited RegistrantStar ContributorObiKen
Registered: October 22, 2015
Reputation: Highest Rating
Australia Posts: 274
Posted:
PM this userDirect link to this postReply with quote
Yes, that's another mismatch scenario I observed as well when the contributor added a different Blu-ray DiscID to a foreign Blu-ray DiscID profile which was approved. The DVDprofiler program didn't validate the DiscID variation and the screeners didn't detect the anomaly.

With regards to the DVD DiscID conundrum, yes, I've been thinking about adding multiple DiscIDs into a single DiscID profile as a potential solution for some time, but I discounted it as a viable solution as it would break the cardinal rule that there should be a one-to-one relationship between the DiscID profile name and the DiscID in the disc information section of the profile.

If we allow multiple DVD DiscIDs in a single DVD DiscID profile, it sets a precedent for changing DiscIDs in Blu-ray DiscID profiles and 4K DiscID profiles as well. If we can't use the original DiscID profile name as our single reference how can we prove which DiscID is correct?
DVD Profiler Unlimited RegistrantStar ContributorLithurge
Paralysis by analysis
Registered: March 13, 2007
Posts: 1,279
Posted:
PM this userView this user's DVD collectionDirect link to this postReply with quote
Never mind.
IVS Registered: January 2, 2002
 Last edited: by Lithurge
DVD Profiler Unlimited RegistrantStar ContributorObiKen
Registered: October 22, 2015
Reputation: Highest Rating
Australia Posts: 274
Posted:
PM this userDirect link to this postReply with quote
Here's another observation you may wish to consider:

Alternate DiscID profiles have a different profile ID name beginning with typically "VV..........." which don't match the DiscID in the Disc Information section.
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
Quoting ObiKen:
Quote:
Here's another observation you may wish to consider:

Alternate DiscID profiles have a different profile ID name beginning with typically "VV..........." which don't match the DiscID in the Disc Information section.

Yeah, I know. Unfortunately I don't know any way to ”decrypt” the alternative Disc ID, so I don't know if it's a match or not. But perhaps I ought to give a different reason for listing it.
My freeware tools for DVD Profiler users.
Gunnar
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
Oh yes you do!

Just look at the XML, its all there. Example VV1G3QULL3TQ0I302.xml.

  <ProfileTimestamp>2018-03-10T02:06:32.000Z</ProfileTimestamp>
  <ID>VV1G3QULL3TQ0I302</ID>
  <ID_Base>I0C07AF56A3EE8123</ID_Base>
  <ID_VariantNum>2</ID_VariantNum>
  <ID_LocalityID>0</ID_LocalityID>
  <ID_LocalityDesc>United States</ID_LocalityDesc>
  <ID_Type>DiscID</ID_Type>

Remove the "I" from ID base, and you get the original 16 digit hex disc ID.

I sent you a PM for how to do it with the API.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
Dang! I overlooked that. Thanks for the heads up! 
My freeware tools for DVD Profiler users.
Gunnar
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
IdCheck version 1.1.1

I don't quite know what to say. Looking at the code I see that I actually did the comparison correctly, even for alternate IDs. I just should have displayed the original ID instead of the alternate ID. Color me absent minded.

So I changed that, and added a checkmark to show that the profile actually has a alternate ID.
But I also found I bug that I fixed, so it was good that I had to have a close look at the code. It turns out that double clicking a row to select the profile in Profiler only worked for US profiles. Doh!    Anyway, that's been fixed. And now it looks like this:



There is something screwy, though. It looks like we actually can get different IDs on a new submission. I'm going to have to dig deeper to investigate that.

Note: The Disc IDs don't actually start with "I". This was added to make the comparison easier since the profile ID does start with an "I". Maybe I ought to have dropped it in the display? Call me lazy ...
My freeware tools for DVD Profiler users.
Gunnar
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
I would vote for removing the "I" from the disc ID display, because the "I" is actually not part of the disc ID, but it is part of the Profile ID Base (UPC). So many people are confused by the Invelos nomenclature, seeing it clearly and correctly displayed in your tools is a big help.

Edit: maybe display the discID portion of the profile ID in a different, matching, color to the discID?
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
 Last edited: by mediadogg
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
And reminder: "Profile ID" includes Locality. An Invelos anomaly is that a Profile ID with Locality 0, "United States", is usually displayed without the ".0".

So, if your table were labelled "Profile ID Base" or "UPC/EAN", it would be more accurate, or you could include the locality in the table. In fact, it is not clear how what your table would display for profiles with the same ID Base and different localities?
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
 Last edited: by mediadogg
DVD Profiler Unlimited RegistrantStar ContributorGSyren
Profiling since 2001
Registered: March 14, 2007
Reputation: Highest Rating
Sweden Posts: 4,667
Posted:
PM this userVisit this user's homepageView this user's DVD collectionDirect link to this postReply with quote
Quoting mediadogg:
Quote:
I would vote for removing the "I" from the disc ID display, because the "I" is actually not part of the disc ID, but it is part of the Profile ID Base (UPC).

I have to admit that I hadn't given it any thought until I was proofreading the post, and I felt that explaining it would be sufficient. But I'll put it on my to-do list for a further update (if any).

Quote:
if your table were labelled "Profile ID Base" or "UPC/EAN", it would be more accurate

Well, UPC or EAN wouldn't be accurate since a Disc ID is neither. And since the locality suffix is never actually shown anywhere in the DVD Profiler user interface, I'm not sure that including it would "unconfuse" people.
My freeware tools for DVD Profiler users.
Gunnar
DVD Profiler Desktop and Mobile Registrantmediadogg
Aim high. Ride the wind.
Registered: March 18, 2007
Reputation: Highest Rating
United States Posts: 6,460
Posted:
PM this userVisit this user's homepageDirect link to this postReply with quote
On your second point, again Invelos is full of confusions. Look at the collection columns. Disc ID appears in the UPC column, but identified within the cell as a Disc ID. And of course, internally, the database stores the UPC, DiscID, manual ID, and alternate ID in the same field.

I agree with your point about locality suffix, but of course the column is available in the collection tab. And unless you show it, how can you distinguish two entries in your table that have the same Disc ID, but different localities?

Minor side point: Adding to collection "multiple", and flag sets, both use the internal profile ID format, including the locality suffix with the US exception. While not explicitly in the UI, anybody who uses those, must understand the format.
Thanks for your support.
Free Plugins available here.
Advanced plugins available here.
Hey, new product!!! BDPFrog.
    Invelos Forums->DVD Profiler: Plugins Page: 1 2  Previous   Next