| Author |
Message |
| Registered: March 13, 2007 |  Posts: 462 |
| | Posted: | | | | This is stupid, but I have to ask. Can I install this on my cell phone?
I have a Motorola V3 RAZR. | | | "I am Andrew Ryan and I am here to ask you a question:
Is a man not entitled to the sweat of his own brow?
No, says the man in Washington. It belongs to the poor.
No, says the man in the Vatican. It belongs to God.
No, says the man in Moscow. It belongs to everyone.
I rejected those answers. Instead, I chose something
different. I chose the impossible. I chose…
Rapture." |
|
| Registered: March 13, 2007 | Reputation:  | | Posts: 13,199 |
| | Posted: | | | | This is from the 'readme' file in the download:
REQUIREMENTS:
DVD Profiler Mobile requires:
- DVD Profiler version 3.0.0 or higher for synchronization
- Microsoft Active Sync version 4.2 or higher
-OR-
Windows Mobile Device Center 6.0 or higher (on Vista)
- A Windows Mobile device with one of the following:
- Pocket PC 2002
- Windows Mobile 2003 for Pocket PC
- Windows Mobile 2003 for Pocket PC SE
- Windows Mobile Version 5.0 for Pocket PC | | | No dictator, no invader can hold an imprisoned population by force of arms forever.
There is no greater power in the universe than the need for freedom.
Against this power, governments and tyrants and armies cannot stand.
The Centauri learned this lesson once.
We will teach it to them again.
Though it take a thousand years, we will be free.
- Citizen G'Kar |
|
| Registered: March 10, 2007 | | Posts: 4,282 |
| | Posted: | | | | The readme has been updated. Pocket PC 2002 is not supported. Unfortunately, I experienced some incompatibilities in testing between the .NET CF 1.0 and 2.0 that I wasn't able to resolve, so only 2003 and higher are supported. | | | | Invelos Software, Inc. Representative |
|
| Registered: March 13, 2007 | | Posts: 462 |
| | Posted: | | | | OK, cool. I wasn't sure if it was just Pocket PCs or not.
Thanks! | | | "I am Andrew Ryan and I am here to ask you a question:
Is a man not entitled to the sweat of his own brow?
No, says the man in Washington. It belongs to the poor.
No, says the man in the Vatican. It belongs to God.
No, says the man in Moscow. It belongs to everyone.
I rejected those answers. Instead, I chose something
different. I chose the impossible. I chose…
Rapture." |
|
| Registered: March 13, 2007 | | Reputation: | | Posts: 13,199 |
| | Posted: | | | | Quoting Ken Cole: Quote:
The readme has been updated. Pocket PC 2002 is not supported. Unfortunately, I experienced some incompatibilities in testing between the .NET CF 1.0 and 2.0 that I wasn't able to resolve, so only 2003 and higher are supported. So I found out when I tried to install.  Simple fix, however, I purchased an upgrade to Windows Mobile 2003 for $4.99 and all is right with the world. It looks great, btw. Nice to have something to take with me to Best Buy on Tuesdays.  | | | No dictator, no invader can hold an imprisoned population by force of arms forever.
There is no greater power in the universe than the need for freedom.
Against this power, governments and tyrants and armies cannot stand.
The Centauri learned this lesson once.
We will teach it to them again.
Though it take a thousand years, we will be free.
- Citizen G'Kar | | | | Last edited: by TheMadMartian |
|
| Registered: March 13, 2007 | Reputation:  |  Posts: 2,293 |
| | Posted: | | | | Drat, still working with Windows CE so no hope for me...  | | | | It is dangerous to be right in matters where established men are wrong |
|
| Registered: March 15, 2007 | | Posts: 116 |
| | Posted: | | | | Quoting Ken Cole: Quote:
The readme has been updated. Pocket PC 2002 is not supported. Unfortunately, I experienced some incompatibilities in testing between the .NET CF 1.0 and 2.0 that I wasn't able to resolve, so only 2003 and higher are supported. Damn (pardon my french), that leaves me out to dry and that after waiting so long. But the previews look so fine that I'm starting a campagne to convince my wife I need a new PDA  Looks like another great job Ken. | | | Greetz,
Marc Castermans
 | | | | Last edited: by MarcCastermans |
|
| Registered: March 19, 2007 |  Posts: 93 |
| | Posted: | | | | Sorry but i can't install the program on my pda.
Is a iPaq Pocket PC 1900.
Is this ok for the program? | | | | Beauty is in the eye of the beholder! |
|
| Registered: March 14, 2007 | | Posts: 25 |
| | Posted: | | | | Quoting zefeer: Quote:
Sorry but i can't install the program on my pda.
Is a iPaq Pocket PC 1900.
Is this ok for the program? What version of ActiveSync are you running? At least version 4.2? -drjenkins | | | They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety.
--Benjamin Franklin |
|
| Registered: March 19, 2007 | | Posts: 93 |
| | Posted: | | | | Quoting drjenkins: Quote:
Quoting zefeer:
Quote:
Sorry but i can't install the program on my pda.
Is a iPaq Pocket PC 1900.
Is this ok for the program?
What version of ActiveSync are you running? At least version 4.2?
-drjenkins Thank You 4 your tip. Problem solved and working.  | | | | Beauty is in the eye of the beholder! |
|
| Registered: April 10, 2007 | | Posts: 2 |
| | Posted: | | | | Okay.. here goes... I have an ipaq 2210 with wind 2003 according to other sites (version 4.20.0 build 14053) i have upgraded active sync... but still cant load mobile to the handheld as there aint no instructions and i am appearing to be a dumb old bugger (50+) so help would be greatly appreciated
Frank |
|
| Registered: March 13, 2007 | | Posts: 99 |
| | Posted: | | | | Quoting TeamSnafu: Quote:
Okay.. here goes... I have an ipaq 2210 with wind 2003 according to other sites (version 4.20.0 build 14053) i have upgraded active sync... but still cant load mobile to the handheld as there aint no instructions and i am appearing to be a dumb old bugger (50+) so help would be greatly appreciated
Frank I have an ipaq 2215, which is exactly the same thing you have. The model number difference just denotes different packaging. First unzip the file you downloaded to somewhere on your hard drive, hookup the ipaq to the computer and let activesync do it's thing (sync) Then doubleclick on the setup.exe (or just setup, depending if you have show extentions turned on or not, the setup file is run from your desktop), let it install to the default locations, make sure you install the Microsoft .NET CF 2.0 when it's done installing there should be an icon on your start menu for DVD Profiler Mobile Just tap on that and it will start the program, there won't be any movies in it yet. Then start DVD Profiler on your desktop and the icon just below "File" is what you click on to start the sync process to put your database on your ipaq. Make sure you check the settings, especially the ones marked "Store Collection "Store Images" and "Store Upcoming" if you let it install those files to the main memory of your ipaq and run out of room it may not tell you, if you run out of memory your ipaq may not boot. I ran into this myself( that what i get for not paying attention to the settings after a re-install), the only way i was able to get out of this was to do a hard reset (puts the ipaq back to factory settings) you will lose everything installed to main memory. Lucky for me i had a full backup of my ipaq. I am not trying to scare you into not using this program it's the best thing on my ipaq now, i just wanted to warn you so you don't have the same OH S**T moment i did  Rob | | | | Last edited: by rp_63 |
|
| Registered: April 10, 2007 | | Posts: 2 |
| | Posted: | | | | Thanks Rob.. sorry but i forgot to check this out and have just done it successfully thanks to your guidance.
Frank |
|