Author |
Message |
Registered: March 13, 2007 | Reputation: | Posts: 6,635 |
| Posted: | | | | . | | | Hal | | | Last edited: by hal9g |
|
Registered: March 14, 2007 | Posts: 82 |
| Posted: | | | | A warning for anyone who uses a LG drive to read the disc-id of Ultra HD Blu-rays: LG released firmware updates for some drives to "Improve BD UHD disc compatibility". However, in reality these updates close a loophole in AACS. The result is that DVD Profiler can not use the drive anymore to read the disc-id.
More information: https://www.myce.com/news/lg-blu-ray-burner-firmware-update-closes-aacs-2-0-loophole-cant-downgraded-83322/ | | | Bye, Elwood |
|
Registered: January 27, 2009 | Posts: 180 |
| Posted: | | | | I see that native UHD ripping is now out. (I am fortunate to have a couple of 'friendly' blu-ray players in the pc. DO NOT do a firmware update as this removes the loophole to enable ripping.
I have done a few titles, and seems to work OK. Keeps HDR and Dolby Vision intact. I placed the HDD with them on onto the Oppo, and the picture came up with the HDR / Dolby Vision logo. Also keeps the full HD soundtrack.
I personally would not bother doing this, prefer to own the legit copies. And at 50gig a rip, a lot of wasted space. Only averages 1hr to do the ripping.
EDIT: OK looks like only the 70 titles that were compromised are covered. But more are being added all the time. I happened to test on 'good' titles. Tryed The Shape of Water, and not supported at this time. | | | Last edited: by specise_8472 |
|
Registered: October 22, 2015 | Reputation: | Posts: 274 |
| Posted: | | | | To answer mreeder50's original questions:
a. yes, installing a 4K internal drive in your PC will allow DVDprofiler to capture the 4K Disc ID for profiling purposes. I use a Pioneer BDR-211EBK (the last three letters will vary for each country) for this purpose.
b. It is possible to watch a 4K UHD disc on your PC, however, you will need a lot more than what you specified, plus a deeper pocket :-(
I have a Coffee Lake i5-8600K CPU on a ASUS PRIME Z370-P motherboard with Intel SGX, on-board Intel Graphics UHD630 processor with HDCP2.2 support over HDMI connected to a LG 32" 4K HDR monitor which is also HDCP 2.2 compliant through HDMI 2.0a connectors.
With the above setup, you can run Cyberlink's PowerDVD 17 Ultra on Windows 10 (64 bit) with the Pioneer optical drive and watch 4K discs.
Unfortunately, HDR support is dependant on bandwidth through the HDMI path, and the ASUS Z370 motherboard (and the majority of modern boards) only has a single embedded HDMI 1.4b connector, which restricts the bandwidth to 4K (no HDR) at 24Hz. HDR playback (or lack of it) is just an optional requirement in PowerDVD17 software, it is not a game-breaker.
If the motherboard had HDMI 2.0a then I would be able to watch 4K discs with HDR on my LG monitor.
The following link shows some compatible motherboards for UltraHD playback: http://forum.blu-ray.com/showpost.php?p=13271422&postcount=108
Switching the Intel Graphics off in the BIOS and reverting to a third party graphics card (in my case, a GTX-1070 card which is HDCP 2.2 compliant over HDMI 2.0a) would allow me to run Windows 10 (latest version) in HDR mode (naturally, I need to switch the monitor's HDMI cable to the GTX-1070 HDMI 2.0a connector).
So 4K gaming with HDR (frame rate would be restricted to 60Hz) on Windows 10 will work with the GTX-1070 :-) But I cannot use PowerDVD17 Ultra with this card (or any other third party card that is HDCP 2.2 compliant) to watch 4K movie discs :-(
At the end of the day, if you want the 4K disc info, then invest in an internal 4K optical drive and use DVDprofiler software to extract the information.
If you want to watch a 4K disc on your 4K PC monitor (with HDR) then invest in a 4K player (with HDR support), it's definitely a cheaper option :-) |
|
Registered: March 29, 2007 | Reputation: | Posts: 2,743 |
| Posted: | | | | Thanks ObiKen for the info, I had given up on 4K as being a bit to much for my wallet given all the upgrades I would need. The drives have come down in price which is getting me thinking about it again. | | | Marty - Registered July 10, 2004, User since 2002. |
|
Registered: March 18, 2007 | Posts: 130 |
| Posted: | | | | So if I just want to be able to read the disc id so I can submit to DVDprofiler I can get a Pioneer BDR-211EBK external drive? I’m not looking to actually view the movie just read the id. |
|
Registered: October 22, 2015 | Reputation: | Posts: 274 |
| Posted: | | | | The BDR-211EBK drive is an internal drive (using SATA 3.0 interface cable), I am not aware of an external version. The BDR-211EBK is usually sold in Europe and Australia.
If your locale is America then the equivalent product sold is the internal Pioneer BDR-211UBK: https://www.pioneerelectronics.com/PUSA/Computer/Computer+Drives/BDR-211UBK#specs
Check if your computer can support SATA 3.0 connections and runs Windows, 10, 8.1, 8, 7 or Vista, if OK then you should be able to use this drive to capture 4K Disc-IDs with your DVD Profiler software. |
|
Registered: March 13, 2007 | Posts: 951 |
| Posted: | | | | What is a good inexpensive drive that can read 4K UHD disc IDs? Not looking to rip just want to be able to read the disc ID from 4K discs using DVD Profiler. | | | Are you local? This is a local shop the strangers you would bring would not understand us, our customs, our local ways. |
|
Registered: March 18, 2007 | Reputation: | Posts: 2,550 |
| Posted: | | | | Depends on what your definition of inexpensive is. I use the Pioneer BDR-XD07UHD external drive for this to submit profiles by Disc ID (also use it for my own site use as well). Has worked so far in the past year I've had it. However, it's like $127. |
|
Registered: October 22, 2015 | Reputation: | Posts: 274 |
| Posted: | | | | Quoting mediadogg: Quote: I know that Blu-Ray DVDP discID is proprietary and not related to any kind of Blu-Ray standard. Is it the same for 4K UHD, or is there an actual Industry discID that is being used in DVDP? DVD Profiler (DVDP) uses its own hashing algorithm for 4K/Blu-ray disc IDs and HD-DVD disc IDs. When you press the SET button in the Disc Info section, DVDP will scan the drive in the following order: DVD• check files in \VIDEO_TS\* folder and if exist, calculate the DVD Disc ID by invoking Microsoft's DIRECTSHOW "IDvdInfo2::GetDiscID" routine. 4K/Blu-ray• if previous step cannot find files, check files in \BDMV\STREAM\* folder and if found, calculate Disc ID using Invelos hashing algorithm. HD-DVD• if previous step cannot find files, check files in \HVDVD_TS\* folder and if found, calculate Disc ID using Invelos hashing algorithm. • if no files found in previous steps, display error message dialog box "Unable to read disc ID". | | | Last edited: by ObiKen |
|